Description
Balboa (Vico) Bath Pump LX Series – 1.0 HP, 115V, 9A, Air Switch
Upgrade your soaking tub with the Balboa LX bath pump, a robust 1.0 horsepower unit engineered to replace a wide range of popular pumps, including Waterway Genesis and Balboa Vico WOW. This high-performance pump delivers steady hydromassage action at 115V with a 9A draw, while keeping noise to a minimum for a serene spa experience.
Why this pump stands out
- Wide compatibility — specifically designed to replace many common tub pumps, making it a versatile choice for older baths or mixed-brand installations.
- Dry-run mechanical seal — protects the impeller and motor from wear when the pump runs briefly without water, extending service life.
- Glass-reinforced composite housing — rugged, corrosion-resistant construction that holds up to daily spa use.
- UL Recognized and CSA certified — built to safety standards, giving you peace of mind in residential installations.
- Self-draining suction inlet — helps prevent water stagnation and reduces maintenance.
- Factory-installed cord/plug and air switch — simplifies installation and lets you control the pump conveniently from outside the tub.
- Ultra-quiet operation — provides a soothing hydromassage without overpowering spa sounds.
Key specifications and configuration
- Pump model — LX
- Power — 1.0 HP; Motor amperage 9.0A; Voltage 115V
- Speed — 1-Speed (1-Spd)
- Discharge — Center discharge, 1-1/2" MBT (Male Buttress Thread)
- Suction — Bottom suction, 1-1/2" MBT
- Pipe connections — 1-1/2" suction and discharge
- Dimensions — 12-7/16" L × 5-1/4" W × 6-15/16" H
- Drain plug — None
- Cord & switch — Factory-installed cord/plug and air switch
Ideal use cases
- Homeowners upgrading aging tubs to reliable, modern hydromassage power
- Installers replacing worn-out Waterway Genesis or Balboa Vico WOW pumps with a single, durable LX unit
- Bath remodels where a quiet, dependable pump is essential for a spa-like experience
- Renovations requiring a low-maintenance, self-draining suction design to minimize upkeep
Installation and compatibility tips
The LX pump is built to fit a broad array of tubs due to its standard 1-1/2" suction and discharge ports and MBT threading. When installing, verify that your piping matches 1-1/2" MBT connections and that the center-discharge orientation aligns with your existing plumbing layout. The factory-installed cord/plug and air switch streamline setup, so you can test operation quickly after wiring.
Maintenance and troubleshooting
For long-lasting performance, keep the area around the pump clear of debris and ensure the self-draining inlet remains unobstructed. If the motor does not start when plugged in, check that the tub’s external switch is ON and the air switch is engaged. If issues persist, verify power supply stability (115V) and confirm the mechanical seal isn’t compromised from dry-running scenarios.
Why choose this Balboa LX pump over generic replacements
Beyond the basics, the LX model emphasizes durability and reliability with a glass-reinforced housing, a protective dry-run seal, and safety certifications. The built-in air switch and cord/plug eliminate guesswork during installation, while the quiet operation and self-draining inlet deliver a spa-quality experience with less maintenance over time.
Contains everything you need for a straightforward replacement or upgrade, delivering robust hydromassage performance, compatibility with a wide range of tubs, and a focus on quiet, dependable operation.
This model LX pump is commonly used to replace Waterway Genesis and Balboa Vico WOW pumps
LX Hydromassage Bath Pumps will replace almost any Bathtub Pump made today
This model LX pump is commonly used to replace Waterway Genesis and Balboa Vico WOW pumps
- If the motor does not start upon plugging it in, the switch may be in the off position.
Dimensions: 12-7/16" L x 5-1/4" W x 6-15/16" H#
- Dry run mechanical seal for reliability
- Glass reinforced composite pump housing
- UL Recognized and CSA certified
- Self draining suction inlet
- Center discharge
- Factory installed cord / plug
- Factory installed air switch
- Ultra quiet operation
| Manufacturer | Vico/Balboa |
| Pump Model | Power WOW |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115v |
| Drain Plug Location | None |
| Suction Style | Bottom |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Center |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Horsepower | 1.0hp |
| Motor Amperage/Wattage | 9.0A |
| Manufacturer | Vico/Balboa |
| Pump Model | Power WOW |
| Speed | 1 Speed (1-Spd) |
| Motor Voltage | 115v |
| Drain Plug Location | None |
| Suction Style | Bottom |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Center |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Horsepower | 1.0hp |
| Motor Amperage/Wattage | 9.0A |


