Watkins No Fault Heater, Low Flow, Laing Tri-Bend, 230v, 4.0kW (Watkins)[26-C3160-2S]

Replacement Watkins Hot Springs Heater Assembly, No Fault 6000 (120/240v)

• When using this heater to replace No Fault 1500, you will need HS71536 cord adapter kit and HS71557 plumbing kit.

This heater is also a superior replacement for the Laing Tri-Bend heater #6759 pictured below.

• Streamlined double-pass design
• Superior performance
• Manual reset Hi-Limit
• 4kW heater rating
• Incoloy heater element
• Threaded holes for sensors (sensors not included)
• Terminated wires on power cord
• 1-Year Manufacturer limited warranty

4 kw Heater With Manual Reset Hi limit
Replacement Option For:

• AI #2-00-7027 / MFG #76228
• AI #2-00-7029 / MFG #73791 RETROFIT
• MFG #C3160-2S
• MFG #C3564-2
• MFG #73039

IHH-4000-NHCW-6759, IHH-4000-NHCW-7211.0

This 2015 No-Fault Titanium Heater is the newest factory upgrade replacement for Hot Springs Spas.

Now factory approved and warrantied for all 115 volt 1.5kW and 230 volt - 6kW installations for all 1995-now Hot Springs and Tiger River spa models.

Tips and tricks:
- use your existing vinly tubing to attach to the replacement heater.
- thermistors are different sizes to prevent incorrect installation
- they also have different tips on the ends of the wire to insure they can't accidentally be plugged into the wrong port on the IQ Control Box.
- In most applications, the heater is connected directly inside the spas control box. Please contact us for the correct adapter . You can also utilize your your old plug end and splice onto this new heater.
- it is best to drain your spa when replacing the heater - a good time to clean the shell and cover with these products


Please call our toll free tech line if you have any questions - 1-888-521-6183