Description
Replacement Parts for Models Ring-Lok R, P, PC, UP
FIG NO. |
PART NO. |
DESCRIPTION |
1 |
42-2828-06 |
Cover retainer |
2 |
39-2579-02 |
Strainer cover 10/89 (replaced 39-0392-01) |
3 |
16-0139-06 |
Strainer basket |
4 |
47-0358-03 |
O-ring, O-264 |
5 |
NLA |
1-1/2" strainer body w/plug see fig. 30- (R-Kit) |
5 |
NLA |
2" strainer body w/plug see fig. 30- (R-Kit) |
6 |
NLA |
1-1/2" suction flange - see fig. 31 |
6 |
NLA |
2" auction flange - see fig. 31 |
| 7 | 14-4206-08 | Diffuser bolt 8-16 x 1 1/4" SS |
8 |
31-1609-06 |
Drain plug w/o-ring 47-0112-00 (replaced 31-1134-00) |
9 |
47-0466-02 |
O- ring, O-264 |
10 |
14-0732-33 |
Base Bolt (4/90 replaced 14-4173-07) |
| 11 | 12-1035-03 | Base assembly 1/85 |
| 12 | 03-0749-03 |
1-1/2" case Assy. w/plug - see fig. 30 & 31 - (R-Kit) |
| 12 | 03-0750-09 |
2" case easy. w/plug - see fig. 30 & 31 - (R-Kit) |
| 13 | 14-3885-08 |
Case bolt PL hex cap 1/4-20 x 4-1/8 (8 required) |
| 14 | 14-0877-04 |
Washer PL 9/32 x 5/8 x .032 (16 required) |
| 15 | 14-0725-24 | Case nut PL Hex 1/4"-20 |
| 16 | 47-0462-06 |
Square ring, G-316 |
| 17 | 06-0157-05 |
Diffuser, 1/2-1 HP full rate & 1-1/2 HP up rate 12/85 |
| - | 06-0163-07 |
Diffuser, 1-1/2-2 HP full rate & 2 HP up rate 5/88 |
| - | 06-0164-06 |
Diffuser, 3 HP full rate 7/88 |
| 18 | 10-1462-07 |
Eye seal, 1/2-1 HP full rate & 1-1/2 HP up rate 3/86 |
| - | 10-1463-14 |
Eye seal, 1-1/2-2 HP full rate & 2 HP up rate 4/89 |
| - | 10-1464-13 |
Eye seal, 3 HP full rate 4/89 |
| 19 | 05-3806-05 |
Impeller, 1/2 HP up rate |
| - | 05-3800-01 |
Impeller, 1/2 HP full rate & 3/4 HP up rate |
| - | 05-3801-00 |
Impeller, 3/4 HP full rate & I HP up rate |
| - | 05-3802-09 |
Impeller, 1 HP full rate & 1-1/2 HP up rate |
| - | 05-3803-08 |
Impeller, 1-1/2 HP full rate & 2 HP up rate |
| - | 05-3804-07 |
Impeller, 2 HP full rate |
| - | 05-3805-06 |
Impeller, 3 HP full rate |
| 20 | 10-1390-20 |
Shaft seal (AS-877) |
| 21 | 02-1389-07 |
Bracket, 1/2-1 HP full rate & 1-1/2 HP up rate |
| - | NLA | Bracket, 5 5/32" fit 2 HP full rate 10/1/89 |
| - | 02-1351-01 |
Bracket, 1-1/2-3 HP full rate & 2 HP up rate |
| 22 | 14-1292-25 |
Bracket bolt PL hex 3/8 - 16 x 3/4 (4 required) |
| 22 | - |
Motor |
| 23 | 24-0069-00 |
1-1/2" strainer assy. "P to R" repair kit |
| 24 | NLA |
2" Strainer easy. "P to R" repair kit |
| 25 | 24-0071-06 |
1-1/2" PC to RC repair kit |
| - | NLA |
2' PC to RC repair kit |
| 26 | 14-1266-35 | Bracket bolt 1/4-20 x 3/4" SS "R" model |
| 27 | 14-1269-16 | Case bolt 1/4" - 20 x 1 1/4" SS "R" model |
| 28 | 03-0811-06 | 1 1/2" case assembly w/plug "R" model |
| - | NLA | 2" case assembly w/plug "R" model |
| 29 | 16-0987-09 | 1 1/2" Strainer body w/plug |
| - | 16-0986-00 | 2" Strainer body w/plug |
| Note: Repair Kits No. 30 & 31 will replace all model "P" Series suction and discharge components to current design "P" models. Note #2: For obsolete units built prior to 1/84 when replacing diffuser or impeller all three New Style components No. 15, 16, and 17 diffuser eye seal end impeller must be used and will provide new Hydraulic Design. Order by adding "RKIT" to item #17 impeller HP selection. | ||
**NLA = No Longer Available, OBS = Obsolete****