Laser Sand System Complete

L160C-7, L192C-7, L225C-7 Series Complete Sand Filter Systems

Laser Series Complete Sand Filter & Pump System

• 14", 16", 19", 22.5" and 25" models.
• Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand - up to 25 gpm/sq. ft. without sand migration or channeling.
• Non-Corrosive resin clamp for simple installation and service of dial valve and filter components.
• 7-way dial valve with "sight glass", automatic air-relief and pressure gauge. (Filter, Backwash, Rinse, Whirlpool, Drain, Test, Winterize)
• 14" laser models are avaiable with 5-way valve.
• Underdrain with "side-slotted" laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy service "Snap-fit" laterals.
• Deep, high capacity sand bed carries more debris and extends filter cycles.
• Bottom drain for winterizing and draining.
• LR Series pump with Ring-Lok access to strainer basket. Patented air cool heat sink allows pump to run dry without damage to shaft seal. Unconditional Two-Year Warranty against seal failure.
• 6 ft. cord pumps feature 3-prong grounded plugs.
• 3 ft cord pumps feature a NEC twist lock plug (UL listed).
• Injection molded, high quality platform base provides a non-corrosive elevated surface for sturdy support of pump and filter.
• Maximum water temperature 104° F
  • 14" model = 90° F
  • 16" model = 95° F

PERFORMANCE

Model No.	Area Sq. Ft.	Flow Rate GPM	6 Hours Gallons	8 Hours Gallons	Sand (Lbs.)	Operating Pressure PSI
L140C-5	14"	1.02	30	10,8000	120	90
L160C-7	1.33	33	12,000	16,000	140	35
L192C-7	1.87	46	16,8000	22,400	200	35
L225C-7	2.64	66	23,8000	31,700	250	50

NOTE: Flow Rate - 25 GPM/sq. ft.. Actual system flow rate is dependeant on pump selection and plumbing.. Recommended sand: #20 silicia sand.

115V SYSTEM ~ 3' CORD WITH HEC TWIST-LOCK PLUG

Model No.	Item No.	Hertz	HP	Full Load Amps	Service Factor
L140C-5-S7LR3-HK6	9408-4940	60	3/4	9.8	1.0
L160C-7-S1LR3-HK6	9408-4950	60	1	9.8	1.0
L192C-7-S15LR3-HK6	9408-4951	60	1 1/2	12.4	1.0

115V SYSTEM ~ 6' CORD WITH 3 PRONG GROUNDED PLUG

Model No.	Item No.	Hertz	HP	Full Load Amps	Service Factor
L160C-7-S1LR6-HK6	9408-4953	60	1	9.8	1.0
L192C-7-S1LR6-HK6	9408-4958	60	1	9.8	1.0
L192C-7-S15LR6-HK6	9408-4963	60	1 1/2	12.4	1.0
L225C-7-S15LR6-HK6	9408-4968	60	1 1/2	12.4	1.0