Balboa Gemini Plus II, 1.5 HP, Cord (NR4-C) NO air switch

ALL Gemini Pumps today come WITH the air switch.

Here are instructions you will need to remove the air switch.

Air Switch Removal - ITT Gemini Plus II 

1. Flip the pump upside down
2. Remove the three screws from the plate
3. Unplug the two wires attached to the air switch
4. Remove the purple jumper wire from the black wire
5. Connect the two black wires together (one female/one male)
6. Put the plate back on the motor and tighten the three screws