Description
Replacement Parts for Models Ring-Lok P, PC. EP
FIG NO. |
PART NO. |
DESCRIPTION |
1 |
NLA |
Cover retainer limited stock OBS 1991 (Not Available) |
2 |
39-2579-02 |
Strainer cover 10/89 (replaced 39-0392-01) |
3 |
16-0139-06 |
Strainer basket |
4 |
47-0463-05 |
Square ring, O-264 |
5 |
NLA |
1-1/2" strainer body w/plug see fig. 30- (R-Kit) |
- |
NLA |
2" strainer body w/plug see fig. 30- (R-Kit) |
6 |
NLA |
1-1/2" suction flange - see fig. 31 |
- |
NLA |
2" auction flange - see fig. 31 |
7 |
31-1609-06 |
Drain plug w/o-ring 47-0112-00 (replaced 31-1134-00) |
8 |
47-0466-02 |
Square ring, O-264 |
9 |
14-0725-24 |
Case nut (8 required) |
10 |
14-0877-04 |
Washer PL 9/32 x 5/8 x .032 (16 required) |
11 |
14-3885-08 |
Case bolt PL hex cap 1/4-20 x 4-1/8 (8 required) |
12 |
03-0749-03 |
1-1/2" case Assy. w/plug - see fig. 27 &28 - (R-Kit) |
- |
03-0750-09 |
2" case easy. w/plug - see fig. 27 & 281 - (R-Kit) |
13 |
47-0462-06 |
Square ring, G-316 |
14 |
NLA |
Diffuser, 1/2-1 HP full rate & 1-1/2 HP up rate (refer to figure no. 17) |
- |
NLA |
Diffuser, 1-1/2-2 HP full rate & 2 HP up rate (refer to figure no. 17) |
- |
NLA |
Diffuser, 3 HP full rate (refer to figure no. 17) |
- |
06-0157-05 |
Diffuser, 1/2-1 HP full rate & 1-1/2 HP up rate 12/85 |
- |
06-0163-07 |
Diffuser, 1-1/2-2 HP full rate & 2 HP up rate 5/88 |
- |
06-0164-06 |
Diffuser, 3 HP full rate 7/88 |
15 |
10-1462-07 |
Eye seal, 1/2-1 HP full rate & 1-1/2 HP up rate 3/86 |
- |
10-1463-14 |
Eye seal, 1-1/2-2 HP full rate & 2 HP up rate 4/89 |
- |
10-1464-13 |
Eye seal, 3 HP full rate 4/89 |
16 |
05-3386-03 |
Impeller, 1/2 HP up rate - replace with 05-3506-05-RKIT |
- |
05-3387-02 |
Impeller, 1/2 HP full rate & 3/4 HP up rate - replace with 05-3800-01-RKIT |
- |
05-3384-05 |
Impeller, 3/4 HP full rate & 1 HP up rate - replace with 05-3801-00-RKIT |
- |
05-3385-04 |
Impeller, 1 HP full rate & 1-1/2 HP up rate - replace with 05-3802-09-RKIT |
- |
05-3382-07 |
Impeller, 1-1/2 HP full rate & 2 HP up rate - replace with 05-3803-08-RKIT |
- |
05-3383-06 |
Impeller, 2 HP full rate - replace with 05-3804-07-RKIT |
- |
05-3381-08 |
Impeller, 3 HP full rate - replace with 05-3805-06-RKIT |
- |
05-3806-05 |
Impeller, 1/2 HP up rate |
- |
05-3800-01 |
Impeller, 1/2 HP full rate & 3/4 HP up rate |
- |
05-3801-00 |
Impeller, 3/4 HP full rate & I HP up rate |
- |
05-3802-09 |
Impeller, 1 HP full rate & 1-1/2 HP up rate |
- |
05-3803-08 |
Impeller, 1-1/2 HP full rate & 2 HP up rate |
- |
05-3804-07 |
Impeller, 2 HP full rate |
- |
05-3805-06 |
Impeller, 3 HP full rate |
17 |
10-1390-20 |
Shaft seal (AS-877) |
18 |
02-1389-07 |
Bracket, 1/2-1 HP full rate & 1-1/2 HP up rate |
- |
02-1351-01 |
Bracket, 1-1/2-3 HP full rate & 2 HP up rate |
19 |
14-1292-25 |
Bracket bolt PL hex 3/8 - 16 x 3/4 (4 required) |
| 20 | 12-1035-02 |
Base bolt 1/85 |
21 |
14-0732-33 | Base Bolt |
22 |
39-2524-08 |
Strainer cover (EP) |
23 |
47-0353-40 |
Cover 0-ring (EP) |
24 |
16-0240-02 |
Strainer basket (EP) |
25 |
NLA |
Strainer body (EP) - see fig. 27- (R-Kit) |
26 |
-- |
Motor |
27 |
24-0069-00 |
1-1/2" strainer assy. "P to R" repair kit |
- |
NLA |
2" Strainer easy. "P to R" repair kit |
28 |
24-0071-06 |
1-1/2" PC to RC repair kit |
- |
NLA |
2' PC to RC repair kit |
| Note: Repair Kits No. 30 & 31 will replace all model "P" Series suction and discharge components to current design "P" models. Note #2: For obsolete units built prior to 1/84 when replacing diffuser or impeller all three New Style components No. 15, 16, and 17 diffuser eye seal end impeller must be used and will provide new Hydraulic Design. Order by adding "RKIT" to item #17 impeller HP selection. | ||
**NLA = No Longer Available, OBS = Obsolete****